VERMEC
  • Home
  • About Us
  • Contact Us
  • Engineering Services
  • Woodworking Tools & Supplies
  • Vermec Deep Hollowing Chisel Sets
  • >
  • UDH Chisel Set

UDH Chisel Set

SKU:
A$545.00
22 545 A$22.00 - A$545.00
Unavailable
per item
The Ultimate Deep Hollower
  • Designed for easy and safe hollowing up to 350mm depth (14")
  • No Clogging/No dig in/Quick to set up
  • Can be used from either side of the lathe ( used on existing Camlock)
Set Includes- Handle, Side Handle, Extension Shaft, Tool-Holder, Curved Shaft with 10mm Tungsten Carbide Cutter and Curved Shaft with 25mm Shear Scraper Cutter (High Speed Steel).

Not Suitable for small lathes with tool post diameters under 22.2mm (7/8")

Please specify your lathe brand/model and tool post diameter. Note to seller can be added after you enter payment details, under review and submit order or email details.
Add to Cart

Ultimate Sanding Heads- Available in Three  sizes: 35mm, 50mm & 75mm .Used in Conjunction with the Vermec Ultimate Deep Hollowing Set Makes sanding inside deep hollow vessels simple and safe. Uses Velcro-backed sandpaper in any grade for a perfect finish.

Curved Ring Cutter V.21- Non Clogging, Adjustable Cutter for various depths, Includes Mounted Point for Sharpening HSS.
Now made fully in High Speed Steel.

Straight Shaft Negative Rake- The High Speed Steel teardrop hard wood scraper has a negative rake on the bevel, this minimizes the risk of a tear out, the result is a highly polished surface. The Tip can be used on both straight and curved shafts from the UDH Set. 

Straight Shaft with 10mm Tungsten Carbide  Cutter​-  Same diameter as the 10mm curved Tungsten Carbide  cutter only with a straight  shaft which allows you to get in narrower openings.

​
Straight Shaft with 25mm Shear Scraper-  Same diameter as the 25mm curved Shear Scraper  only with a straight  shaft which allows you to get in narrower openings.

​Sharpening Mandrel-  
Easy tool to sharpen 25mm Shear Scraper Cutter.

Depth Gauge with Laser -  Fitted with a laser pointer device to accurately set the wall thickness of your deep hollowing project. In use, the laser first produces a dot on the wall of your turned form and as you reach the desired thickness this dot will gradually lengthen into a line and finally disappear when target thickness is reached.                                                                                            

Sanding Head
Ultimate Deep Hollowing set up
Sharpening Mandrel
Ring Cutter 1
Sanding Heads 
Ring Cutter 2
Brendan Stemp UDH   N.B Gate was used incorrectly 
​Depth Gauge with Laser 1
​Depth Gauge with Laser 2

Prices: All prices are in Australia Dollars A$ GST: (Local Australian Tax) inclusive to Australian orders only

  • Home
  • About Us
  • Contact Us
  • Engineering Services
  • Woodworking Tools & Supplies