Multi Centre Chuck v.21
The Multi Centre Chuck V.21 now mounts directly to your lathe spindle via an adaptor (Insert). This allows you to put details in your work that are not concentric with your lathe spindle. The amount of offset ( 0 -30mm ~ in 5mm Increments ) is easily adjusted using a hex key and the amount of offset is visible in a viewing window on the chuck. Of course you can set the chuck offset to 0 and machine on centre as normal. ( Using the chuck as a screw face plate.)
You also have the ability to index your job around in equal divisions allowing you to produce complex patterns and even square or triangular shapes, example 2=180 deg,3=120 deg,4=90 deg,6=60 deg, Your imagination is the only limit to your design.
Please specify your lathes thread size. Note to seller can be added after you enter payment details, under review and submit order.
"Important Information NOT suitable for Mini and Midi sized Lathes"
MCC V.21 with Indexing mounts via adaptor
mcc video v.16MCC VIDEO 4 V.16 |
Timber piece turned on the MCC
V.21
MCC VIDEO 2 V.16
Turned off centre bowl sample
|
Turned samples
MCC VIDEO 3 V.16 |