·Can be fitted to most thread sizes simply by changing the adaptor/insert
· Available in sizes from 75mm to 200mm, in increments of 25mm
· Can be purchased on their own or with an adaptor/insert
· Type of adaptor/insert you use will depend on your application
·Use as a standard Faceplate by fitting an insert, which are available in the most popular thread sizes
·Use as Screw Faceplate by using the Faceplate Screw Body, also available in the most popular thread sizes, and Faceplate Screw
Face Plate with Insert
Multi-position mounting for carving Can be rotated to almost any position Can be mounted on lathe bed or bench.
Please specify thread size required and lathe bed gap
With fine adjustment. To be used in conjunction with the indexing attachment for decorative work.
(Router not included)
Available in Bore 42mm and 65mm
ACC-287 42mm $150.00 ACC-288 65mm $165.00
To suit most lathes. The indexing plate will suit Vicmarc, Bonham and Nova chucks. Outer ring has 36 holes, Inner ring has 24 holes. The locating pin has 4 hole spacings on the bracket to allow multiplied spacing without moving the item on the chuck. Has from 2 to 144 hole indexing options,and is used on the inboard. The indexing attachment is available in the spindle sizes
M30, M33, 1 1/4”x8, 1”x10, 1”x8, and 3/4”x16
Please specify when ordering Centre height, Bed gap and spindle size.
28.5mm Drive Dog
Can be mounted in 2 ways, either with the Morse Taper directly into the lathe spindle or by using the cylindrical hold in a chuck to avoid damage to the Morse Taper. The point is hardened and removable and is available in Morse Taper 2 size.
This table can be used to mount your own timber top to use in conjunction with the Router Attachment.
Camlock Table with Collar 150 x 150mm
Please specify Post Diameter
Tailstock Swivel Attachment
The Tailstock Swivel Attachment can be used on a Vicmarc VL300 shortbed lathe and allows the tailstock to be swiveled out of the way when turning long objects or using long chisels without having to remove and refit the heavy tailstock. An added bonus is that it lengthens the lathe by 300mm
The Vermec Spindle Extension extends the Spindle out from the lathe by 60mm. This is especially useful on swivel head lathes, particularly when working on larger pieces, as it increases the gap between the item and the machine. Available in various thread sizes.
Please quote thread size required
3 Point Steady
Vermec’s 3 Point Steady comes with top opening for easy use.
50MM Drive Dog suitable for larger work, comes with a insert available in a verity thread sizes, so can be used on most woodturning lathes. Point is hardened and removable.
The Spindle Adaptor allows you to adapt thread sizes by having different thread sizes on each end. An example of this is you can fit an 1”x8tpi faceplate to an M30x3.5 threaded lathe spindle simply by using the adaptor. Different thread sizes available to suit your requirements.
Please quote threads sizes required for both male and female threads
Collet Adaptor Sets ER32 & ER25
Includes Collet Adaptor ,Collet Set and Spanner.
- For direct mounting of ER25 & ER32 Collet (precision chuck) onto the spindle thread.
- Collet can be used for clamping drum sanders, pen mandrels, dowels, etc
ER32 Min 3mm - Max 20mm
ER25 Min 3mm - Max 16mm
ACC-099 ER32 Collet Adaptor Set M33 x 3.5 $157.00 ACC-100 ER32 Collet Adaptor Set M30 x 3.5 $157.00 ACC-101 ER32 Collet Adaptor Set 1 1/4 x 8 $157.00 ACC-102 ER32 Collet Adaptor Set 1 x 8 $157.00 ACC-103 ER32 Collet Adaptor Set 1 x 10 $157.00
ACC-105 ER25 Collet Adaptor Set M33 x 3.5 $145.00 ACC-106 ER25 Collet Adaptor Set M30 x 3.5 $145.00 ACC-107 ER25 Collet Adaptor Set 1 1/4 x 8 $145.00 ACC-108 ER25 Collet Adaptor Set 1 x 8 $145.00 ACC-109 ER25 Collet Adaptor Set 1 x 10 $145.00
ACC-114 ER25 Collet set only $140.00 ACC-115 ER32 Collet set only $145.00
Collet Set Display boxes and pieces will vary upon availability.
Vermec “S” and “Z” Toolrests now available with removable post -
you only need to change post to suitdifferent lathes